MAINTENANCE TANK RECYCLE KITS FOR EPSON WIDE FORMAT PRINTERS
  • Save over 60% compared to replacing tank
  • Recycling a tank takes only 5 minutes
  • Use the same tank again and again
  • Environmentally friendly - reduces the
    amount of plastic in landfills
recycle a tank three times
  • Continue recycling the same tank by
    buying absorbent wadding three sets at a
    time
These kits provide a simple way of recycling the waste ink tank on an Epson wide format printer. The starter kit comes
with a chip resetter and 3 sets of the absorbent wadding material for the tank (original tank is not included). The resetter
is simply placed on the maintenance tank chip and resets the chip back to empty. The wadding is then replaced and the
tank is ready for re-use. Once a tank has been recycled three times then further sets of wadding (sold in packs of 3) can
be purchased so that a tank can continue to be recycled - the chip resetter works many times. Using maintenance tank
recycle kits is not only kinder to the environment but also saves approx 60% compared to replacing used tanks. See
below for pricing. A user guide for maintenance tank recycle Kits can be found by clicking here.

The Ink2image Maintenance tank kit currently works with tanks for the Epson Pro 4000, 4800, 4880, 7600, 7700, 7800,
7880, 7890, 7900, 9600, 9700, 9800, 9880, 9890, 9900, and 10000.
HOW TO RECYCLE A MAINTENANCE TANK
Recycling a maintenance tank is extremely simple and takes about 5 minutes. All you
need is the relevant Ink2image recycle kit, a small flat blade screwdriver and a
garbage can.

Step 1 - Using the small flat blade screwdriver, unclip the plastic grid from the top of
a full tank.
Step 2 - Hold the tank over a garbage can, remove and dispose of all the existing
wadding from the tank. The wadding will be saturated in waste ink so best to have a
liner in the garbage can to prevent staining of the can.
Step 3 - Take a set of replacement absorbent wadding and insert it into the tank.
Step 4 - Clip the plastic grid back in place on top of the tank.
Step 5 - Take the chip resetter and place it onto the maintenance tank chip. The
resetter indicator light will flash red for a few seconds and then turn green to indicate
that the tank chip has been reset to empty. The tank is now ready to be re-used.

Repeat this simple process every time the tank gets full. The chip resetters work
many hundreds of times but can be purchased as spare parts if required.
MAINTENANCE TANK RECYCLE KITS FOR EPSON PRO PRINTERS
Product Code
Product description
Price
  
WTK.KIT
Maintenance tank recycle kit for Epson Pro 4000, 4800, 4880, 7600, 7800, 7880,
9600, 9800, 9880, and 10000 - includes chip resetter and three sets of
absorbent wadding. (Does not include original tank)
$ 60.00
WTK9700.KIT
Maintenance tank recycle kit for Epson Pro 7700 and 9700 - includes chip
resetter and three sets of absorbent wadding. (Does not include original tank)
$ 85.00
WTK9900.KIT
Maintenance tank recycle kit for Epson Pro 7890, 7900, 9890, and 9900 -
includes chip resetter and three sets of absorbent wadding. (Does not include
original tank)
$ 85.00
WTK.SET
Set of three maintenance tank wadding refills only.
$ 40.00
EUNIRESET
Spare chip resetter for maintenance tank on Epson Pro 4000, 4800, 4880, 7600,
7800, 7880, 9600, 9800, 9880, and 10000
$ 40.00
E9700MTRESET
Spare chip resetter for maintenance tank on Epson Pro 7700 and 9700
$ 60.00
E9900MTRESET
Spare chip resetter for maintenance tank on Epson Pro 7890, 7900, 9890, and
9900
$ 60.00
Ink2image, 4338 Regency Drive, Glenview, IL 60025, USA..   Tel 847 827 0747 or (toll free) 800 443 9508.   Fax 847 827 0797.    E-mail Click here...
This website is no longer being updated as of Jan 1st, 2018. Ink2image products are
available through Absolute Inkjet incorporated.
Please go to www.absoluteinkjet.com.
For specialist inks for screen positive film printing, please go to
www.screenpositive.com.